19-Aug-2014, 08:25 PM
NOTE: A 'Firewall Exception' for SpeedFeedService.exe should be automatically added during e-Laps installation. The following Firewall information is provided for reference.
Configure your Firewall by clicking the 'Allow a program or feature through Windows Firewall' menu item in Windows Firewall.
The program you need to allow through is "SpeedFeedService.exe". This program is installed in C:\Users\[USER ACCOUNT]\AppData\Roaming\eLapsBufferHandler
Your Firewall settings for SpeedFeedService.exe should look like the following screen shot:
![[Image: SpeedFeedServerFirewall.JPG]](http://www.e-laps.com/forum/images/screenshots/SpeedFeedServerFirewall.JPG)
In e-Laps, on the Network Setup page (7th Menu from the top) click Start on the Timing Relay Server tab... the Output IP and Port fields should turn green.
Configure your Speed-Feed phone app to connect to the displayed IP address and port number (and password if required).
If you are connected to a live decoder (with transponders passing), Speed-Feed will begin receiving the timing feed from e-Laps.
When 'clients' are connected to e-Laps Timing Relay Server, depending upon how they have their Speed-Feed configured, you can view which transponder they have tagged, and what name they have entered for the tagged transponder, as shown in the following screen shot:
![[Image: SpeedFeedTimingRelay.JPG]](http://www.e-laps.com/forum/images/screenshots/SpeedFeedTimingRelay.JPG)
More information on configuring Speed-Feed can be found here:
http://www.speed-feed.com/
Information on the Disconnect and Ban Client buttons is coming soon.
Configure your Firewall by clicking the 'Allow a program or feature through Windows Firewall' menu item in Windows Firewall.
The program you need to allow through is "SpeedFeedService.exe". This program is installed in C:\Users\[USER ACCOUNT]\AppData\Roaming\eLapsBufferHandler
Your Firewall settings for SpeedFeedService.exe should look like the following screen shot:
In e-Laps, on the Network Setup page (7th Menu from the top) click Start on the Timing Relay Server tab... the Output IP and Port fields should turn green.
Configure your Speed-Feed phone app to connect to the displayed IP address and port number (and password if required).
If you are connected to a live decoder (with transponders passing), Speed-Feed will begin receiving the timing feed from e-Laps.
When 'clients' are connected to e-Laps Timing Relay Server, depending upon how they have their Speed-Feed configured, you can view which transponder they have tagged, and what name they have entered for the tagged transponder, as shown in the following screen shot:
More information on configuring Speed-Feed can be found here:
http://www.speed-feed.com/
Information on the Disconnect and Ban Client buttons is coming soon.