How To Use Custom Sounds
Author Message
eLapsRaceTiming Offline
Administrator
*******
Administrators

Posts: 60
Joined: Jul 2014
Reputation: 0
Post: #1
Information How To Use Custom Sounds
This functionality provides the ability to save Custom Sounds for use in the following situations:
  • Custom 'Beep Sound' when cars cross the timing loop
  • Custom sounds when a race starts or finishes
  • Custom sounds the play periodically throughout a race

Configuring custom sounds is carried out on the Race Setup page (2nd Menu item).

Configure a Custom Beep Sound
Click the Sounds / Announcements tab, and then choose Custom option from the Beep Sound drop down list.

[Image: CustomSound_CustomBeep.jpg]

This then displays the Browse button, which can be used to select the desired .WAV sound file.

[Image: CustomSound_CustomBeepFile.jpg]

Once a .WAV sound file is selected, the file can be tested by clicking the small 'play' button next to the drop down list.

Configure a Custom Start / Finish Sound
Click the Sounds / Announcements tab, and then click the Add button below the Custom Sounds list.

[Image: CustomSound_Add.jpg]

A File Open form will open which can be used to select the desired .WAV sound file.
Once a .WAV sound file is selected, click the Save button to add the sound file to the Custom Sounds list.

[Image: CustomSound_Save.jpg]

The sound file can be tested by selecting the file in the list, and then clicking the small 'play' button above the list. Clicking the small Stop button will stop the sound file from playing.

[Image: CustomSound_PlayStop.jpg]

Choose the custom sound file for a start or stop action by selecting the file name (prefixed by "[CS]" in the list) in the drop down lists as required.

[Image: CustomSound_StartSound.jpg]

In the above screenshot example, the Grid Start Sound is now configured to use the Custom Sound file. When a Grid start race starts, it will play the Custom Sound file.

Configure a Custom Periodic Sound
Click the Sounds / Announcements tab, and then select the Custom Sound file name (prefixed by "[CS]" in the list) in the "EXTRA Sound" drop down list.

[Image: CustomSound_ExtraSound.jpg]

Then, in the Periodic Announcement drop down list, choose the "EXTRA Sound [W,R]" list option.

[Image: CustomSound_PeriodicSound.jpg]

Then configure the remaining announcement variables to set the sound to play at the desired race time period. e.g. play the custom sound every 5 minutes

For more information on configuring announcements, see the How To Set Up Announcements guide.

e-Laps Race Timing Software
The next evolution in race control event management software
(This post was last modified: 01-Dec-2016 08:37 PM by eLapsRaceTiming.)
21-Feb-2016 03:47 PM
Find all posts by this user


Forum Jump:


Sponsors:

Advertisement: